On Mon, 25 Apr 2005 08:49:49 -0500, Bob Werre wrote > Bill, Everyone, > I have a AB set of E-9's and a set of E-3/6's and I found the > chsssis for all the units are the same design. I have had very > little problem with coupler height. My guess would be to check the > angled brass strip on the body shell that contains the screw holes. > If that strip is soldered in the wrong position the body and the > couplers will be at the wrong height. That being said if the > coupler is low I would think the pilot would drag on the rails. > > Bob Werre >
While we're discussing front ends, anyone have a quick solution to an F7A front coupler mount. All that is porvided is a tapped post. I was thinking of laminating brass sheets or milling a block of something to get up a pad of sorts but would rather hear of something less annoying to do. cheers, Andy Malette The poll results are in....... To REPLY to the list, use REPLY ALL, to reply to the sender, use REPLY. I do NOT know if this works on all e-mail software, but it works on some of the most common ones. For those of you on DIGEST mode, all REPLY messages go to the list. Change your membership, change your message settings, use our CALENDAR, view shared files or photos, view the list archives, GO TO http://groups.yahoo.com/group/S-Scale/ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
