Thanks to all who provided tips on converting my SHS diesels to DCC with
sound. It's clear there are no shortcuts for a lazy guy like me: I'll have
to take the whole semester's course. Meanwhile, I'm back to building
benchwork, something I understand.
Thanks again, Roger Nulton
----- Original Message -----
From: "John Gibson" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Sunday, June 04, 2006 8:08 PM
Subject: {S-Scale List} DCC Sound for S-Helper Units - Go to S-Helper site
> Greetings:
>
>
>
> If you want to install DCC sound in the SW-1 and/or F3, go to S-Helper's
> website. Hit the link to the SW-1 and the link to the article will
> appear.
> For the F3, go to the "tips and tricks" section.
>
>
>
> For my SW-1, I followed Michael Greene & Bill Clark's excellent directions
> and hard-wired a Lenz 1024 & Soundtraxx DSX with speaker. It was a PAIN
> because you do not have much room to install everything, but it sounds and
> runs great. When Soundtraxx releases the Diesel Tsunami, this install
> should be much simpler. There may be enough room for a plug-in
> installation
> (I hope - I have one more unit to do)
>
>
>
> For my F7's (I bought my F3's with the DCC Sound but they are very
> similar),
> I followed Don's advice mentioned in an earlier post to create plugs out
> of
> the DC Shorting plug. The manual does a great job of explaining the
> socket
> locations so this is not a hard job to do if you are handy with a
> soldering
> gun.
>
>
>
> Cheers,
>
>
>
> John Gibson
>
> Rocklin, Ca
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
