And oh, yes.
For the number boards on the 35's I use AM's standard bulb with a
bigger resistor to reduce brightness. I got a socket for the back truck
to illuminate the rear bulbs. I've got them wired a couple of different
ways - one directly to the power by-passing the decoder so that the
number boards are always illuminated (or I'm tapping off the motor
output I can't remember), the other through the decoder so that it is
switched with the headlamps. I've also got a clunky box that's visible
through the windshield to eliminate the lighted cab effect. Pick your
worse dislike - mine is the illuminated cab rather than the ugly box.
Ben Trousdale
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
