Hi All,
The NASG just reran the American Models Heavyweight 12-1 and 10-1-2 Pullmans
in CNR.
S Helper Service/American Models HWT passenger cars were done in both CNR
and CPR schemes.
Ridgehill has the following resin kits,
CNR 36' Fowler car wood roof, 5' door
CNR 36' Fowler car steel roof, 6' door
CPR 36' Fowler car wood roof, 5' door
CPR 36' Fowler car steel roof, 5' door
CNR wood van wide windows, tall cupola.
CNR wood van wide windows, short cupola.
CNR wood van narrow windows, tall cupola.
CNR wood van narrow windows, short cupola.
They also have various CND lineside structures and a 1929 CNR SS boxcar is
due.
Simon Parent/S Scale Loco & Supply produced a wondrous brass CNR E-10-a
Mogul kit. They are sold out but can be had if you look around. At present
Simon has produced a limited quantity of CNR H-6 10 wheelers built up. They
are to be done in semi-kit form by S Scale Loco & Supply.
PRS, now owned by Des Plaines Hobbies has produced the following.
CNR 40' 10' Inside Height Boxcars in both the white leaf and the 1954
green. Des Plaines produces the 8 rung ladders. If they were purchased
through Ridgehill, they came with the ladders.
CPR 40' 10' Inside Height Boxcar in CPR stepped logo. CPR 10.5' Inside
Height Boxcar in the Spans the World Logo. The ends should be changed to
Improved Dreadnaught. 8 run ladders should only be used on the 10.5 Inside
Height car, the CPR 10' IH cars were 7 rung.
CNR 50' Double Door Boxcar in the 1960 scheme.
CNR covered hopper the 1960 scheme.
M.L.W. Services and SRCC both make detail sets for the PRS boxcars.
M.L.W. Services produces cab and running board numerals for CNR steam
locos. They also produce CNR number plates. They have also produced a CNR
K-3 Pacific kit for the American Models Pacific. In progress is a CNR K-5
Hudson and a CPR F2a class Jubilee.
Overland produced an SD40-2 and GP40-2 with wide nose in brass. They also
produced an MLW RS18/RS11m which was quite generic.
American Models produces a plug door boxcar in both CPR and CNR lettering.
They also have a CPR Alco/MLW F2A, F2B and a CLC/FM Trainmaster in CPR.
S Helper Services produced a CPR USRA SS boxcar, CNR wooden reefer, CNR
rebuilt steel sheathed USRA boxcar, CNR and CPR ore cars, GTW 53' flatcar,
GTW and CNR panel side hoppers, and a CPR SW1200.
A CPR wood express reefer kit bounced around from various manufacturers. I
believe that Scenerey Unlimited still has it.
Black Cat Decals has CNR steam loco, CNR Passenger Car, CNR 36' Fowler Car,
CGTX tank car, CPR Passenged Car and TH&B hopper car decals available.
CDS who is now out of production has New Old Stock left.
Alder Models had CNR switch stands.
Not all is currently available but can be had if you look for it. EBay and
shows are good places to look.
This list is probably not complete but it should give you some idea.
cheers,
Andy Malette
www.mlwservices.ca
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:[EMAIL PROTECTED]
mailto:[EMAIL PROTECTED]
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
