--- In [email protected], "Bill Nielsen" <wrang...@...> wrote:
>Now I'll have to closely inspect all my GP9's to see if any of the >gears are
>different. They all seem to run OK, and any speed >difference I had thought
>was due to different types of motors being >used by AM.
The easiest way to tell is to mark the motor shaft or flywheel and mark a
wheel then count the turns of motor needed to make the wheel turn one
revolution. My GP9 and GP35 both run great at slow speed so I've never bother
to count them but a good slow speed loco typically will have about 12-15 to one
gearing....dave
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
