Gents...I received the following email this morning. John is a skilled O scale modeler. His web site can be found by Googling "Irish Tracklayer". Something new for S -- maybe. Ed L.
_____ From: John Houlihan [mailto:[email protected]] Sent: Wednesday, October 20, 2010 9:06 AM To: [email protected] Subject: A-5 Electropneumatic switch machine I am creating the US&S A-5 electropneumatic switch machine and can make an S scale version is there is enough interest. There would need to be a left and right hand version of the machine, a center point machine for slip switches and the CP valve. It would cost between $200 amd $300 to get the wax masters printed, then $70 for the mold. I would estimate the cost of the castings at $3 to $5 each from the foundry. It means that about $500 worth of preorders would be necessary to produce this item I would be willing to sell to the first group at a reduced price to get the project going -- John Houlihan Irish Tracklayer [Non-text portions of this message have been removed] ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
