I had come across a reference to the V&T T-section Bettendorfs somewhere, too,
and I'd be happy to take 5-6 pair at a minimum if Keith
would produce them. They are a very common prototype pre-WWII and presumably
only available otherwise as brass imports, when
available at all.
Jace Kahn
General Manager
Ceres & Canisteo RR Co./Champlain County Traction Co.
> Pieter Roos's tribal knowledge omits some obvious "S" in his midst, viz.:
>
> 1. Precision Scale has S parts as well. While they are all supposedly Sn3,
> lots of steam fittings apply to standard gauge as well as narrow gauge.
>
> 2. Wiseman Model Services has S standard gauge stuff too. Among these: Two
> styles of SP flatcars (40' and 53'). Also at Wiseman are V&T patterns for
> standard gauge T-section Bettendorf trucks. I'll bet he could be talked into
> running these.
>
> 3. Grandt Line has a line of S parts. Lots of structure stuff, lots of Sn3,
> and a few S standard gauge (notably AB brake set).
>
> Regarding SSL&S, recent news from owner Fred Rouse suggests that he is nearly
> ready to re-emerge, but then I hear he also has serious health problems.
> Sometimes he lurks on this e-list, so maybe he will tell us...
>
> Dick Karnes
[Non-text portions of this message have been removed]
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/