One of the leaf springs on my tender cracked at the joint. I took it out and
gave it a bit of thought. Where would I get a replacement? Probably no where.
Could I make one? Hmm. Then it came to me. Why not solder it and put a bit
of 0.020" wire behind as as bit of strengthener. It works well.
Hopes this helps anyone that has come across this problem.
BTW, I have been in the process for awhile to draw up a correct CNR/GTW clear
vision tender, running boards, steps and cab to modify it to a P-5 class 0-8-0.
If anyone is interested in converting theirs, please let me know.
cheers,
Andy Malette
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
