I purchased a large number of Fred's tires. They 303 stainless steel and single point turned on a CNC lathe. These are the nicest tires I have ever seen made in S scale. I found no evidence of any tooling marks any where on the tires. I stated checking the ID tolerances and after checking the first 40 or so found they were all with in 0.0002" (that is ten thousands and not just thousandths) Fred's kits, both the 2-6-0 and the 4-6-0 are on par with the Boo Rim models products and in certain aspects even better. They definitely put the O scale kit stuff to shame
J. Rustermier --- In [email protected], "Fred" <s-scaleloco@...> wrote: > > I HAVE in stock 63" RP25 code 110 stainless steel driver tires. These are the > same as we used in our Mogul and 10 wheeler kits.I also have driver tires in > 54,57,60,69 and 72 inch. They are $4.50 each. > > Fred Rouse > S Scale Locomotive & Supply > "Dormant, not defunct." > 6721 East Blue Heron Lane > Inverness, FL 34452 > 352 344 4654 > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
