Nice!!!!!! Can you drill the gearbox housing, lube, and plug? Stan
--- In [email protected], "Bill Lane" <bill@...> wrote:
>
> This is a Light Mike I just finished installing a Tsunami in. Just when you
> think you have it all figured out something you didn't see hits you. I use
> RailMaster speakers only. For my locos I have used only the DLG8. It just
> would have not fit without chopping the already small boiler weight in half.
> That in itself **could be fun** because I can use my milling machine! So I
> settled on the DBH23-8 which still JUST fit.
>
>
>
> Anyway the surprise was I had to move the boiler weight towards the cab for
> the speaker to fit so a bigger boiler weight would be tough too. I am used
> to big Belpaire fireboxes. The Tsunami does not fit on top of the motor. It
> is in the middle of the boiler now.
>
>
>
> It is way tight running in spite of giving it a good lube job. This is the
> first time ever I have seen a gear box like this one. It is SOLDERED shut!
> There are no screws holding it together. You cannot get to some of the
> internal gears!
>
>
>
> Here is the a quick n dirty clip of its first run
> http://youtu.be/mr6Ms35FBUs It is likely to be a temporary clip so catch it
> while you can. I mostly made the clip to show my customer it is done and
> running.
>
>
>
>
>
>
>
> Thank You,
> Bill Lane
>
> Modeling the Mighty Pennsy & PRSL in 1957 in S Scale since 1988
>
> See my finished models at:
> <http://www.lanestrains.com/> http://www.lanestrains.com
> Look at what has been made in PRR in S Scale!
>
>
>
> See my layout progess at:
>
> <http://www.lanestrains.com/My_Layout.htm>
> http://www.lanestrains.com/My_Layout.htm
>
> Custom Train Parts Design
> <http://www.lanestrains.com/SolidWorks_Modeling.htm>
> http://www.lanestrains.com/SolidWorks_Modeling.htm
>
> PRR Builders Photos Bought, Sold & Traded
> (Trading is MUCH preferred)
> <http://www.lanestrains.com/PRRphotos.xls>
> http://www.lanestrains.com/PRRphotos.xls
>
> ***Join the PRR T&HS***
> The other members are not ALL like me!
> <http://www.prrths.com/> http://www.prrths.com
> <http://www.lanestrains.com/PRRTHS_Application.pdf>
> http://www.lanestrains.com/PRRTHS_Application.pdf
>
> Join the Pennsylvania Reading Seashore Lines Historical Society
> It's FREE to join! <http://www.prslhs.com/> http://www.prslhs.com
> Preserving The Memory Of The PRSL
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
