Yes, but......
....the original question pertained to a scale version of the Y-3. Anyone out
there interested in a large scale loco that can go around sharp curves? Just a
concept question.
Cheers.....(forgot who I am)
--------------------------------------------------------
> Lionel tends to be delightfully inconsistant on flange depth on Flyer
> wheelsets. Driver flanges tend to be a little less deep(not by much) than
> the other wheelset. But they're all still deeper than old SHS HiRail
> flanges.
>
> If the Challenger is any guide, it will bounce a little on code 100, but
> unless you got moving frog turnouts, forget about going through them.
>
> Rich G(ajnak)
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
