Bill, I am also looking for this same type of material, would appreciate a
heads up if you find a source!
Thanks,
Bud Rindfleisch
--- In [email protected], "Bill Lane" <bill@...> wrote:
>
> I am looking for a sheet of open grate material for the porches of a
> transfer caboose. I would MUCH prefer it is brass (over stainless) and
> possibly up to .020 thick. I would prefer thicker than thinner. The real
> openings are 1" x 6". I doubt that there is anything measuring a true 1 x 6
> in S Scale so somewhat larger holes are better than smaller. I like the see
> though aspect of it all.
>
>
>
> I need at least 2 sheets 2" x 1 ¼". The long part of the openings follow the
> 1 ¼ direction.
>
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/S-Scale/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/S-Scale/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
