Bill; Expanding upon the stuff we talked about over the phone. I have sent a message to Ed McCamey at the NMRA referent to the previous discussions he and I had about code 88 wheels in "S" and P64. There are currently 3 sets of stds for P64 and this is confusing to say the least. I propose we can the other 2 and adopt the tested ones from the NMRA. Further I propose we adopt the stds for High Rail and Narrow Gauge from the NMRA or better as we now have non for this and are spossed to be for ALL "S" modelers. There are no cast in stone stds for Sn42 but most of us use H0. I propose all narrow gauge stds except P64 use code 88 wheels. I do not know what Sn3 currently uses. I also think we should add a couple of RPs. One for Extra-fine (near-proto) std gauge. And another for 3/16 AAR. Most all of this has been engineered if not fully tested. I have spread sheets for all but 3/16 AAR and will have that soon. The RP for ExFine is basically the work done by desPlains with some additions by Ed. Congratulations & Best O Ruck, TC Carr
Talmadge C 'TC' Carr Sn42 and Hn42 somewhere in the wilds of the Pacific Northwest [email protected] On Jul 1, 2013, at 8:39 PM, scale S only wrote: > Seriously, anyone who has CONSTRUCTIVE comments on how to improve the > operation of the NASG, I am willing to listen. Just send me an email... ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
