Carey: WhenI try to upload the Ebay link in your message, all I get is a blank page. When I tried to put the photo in an attachment in a message that failed, too. So, I finally uploaded it in the Photos section ( http://groups.yahoo.com/group/S-Scale/photos/album/1775582643/pic/984482877/view?picmode=&mode=tn&order=ordinal&start=41&count=20&dir=asc )where everybody could see what I am talking about, since I do'nt seem to be able to explain it fluently. That's what happens when a person is dyslectic, I guess.
Anyway, I have uploaded a photo of the connector I'm talking about, and a #1 machine screw for size comparison. I hope someone can help! boB Nicholson ______________________________________________ --- In [email protected], Carey Probst <s-scale@...> wrote: > > Are these the ones you mean? > > Just ordered a bunch of them formy wiring conversions on the steamers > and use elsewhere on the sometime layout. > > http://www.ebay.com/itm/20-x-Micro-JST-1-25-2-Pin-Connector-Plug-Male-Female-with-Wire-REGISTERED-MAIL-/251325577530?ssPageName=ADME:L:OU:US:3160 > > LBR has them as well but without wires so you can solder to the male end > and it has the little solder pins for the female side. > > Carey > Carey Probst > > Carey Probst > > Member, M.I.T. Educational Council > > S Scale, Sn3 and S High Rail/AF > > A well regulated militia being necessary to the security of a free State, > > the right of the people to keep and bear arms shall not be infringed. > > On 9/1/2013 8:40 AM, shabbona_rr wrote: > > > > Thanks Roger: > > > > That solves another lifelong mystery for me, since I've had plenty of > > uses for those over the years, as well, but it doesn't answer my > > original question. Maybe later today I can post a photo of what I'm > > talking about. Maybe a photo will explain what I cannot. > > > > Thanks again, though > > > > boB Nicholson _______________________________________________ > > > > --- In [email protected] <mailto:S-Scale%40yahoogroups.com>, > > "Roger Nulton" <roger.nulton@> wrote: > > > > > > boB, > > > > > > Like these? > > > > > > http://www.modeltrainsoftware.com/pin-connectors.html > > > > > > Roger Nulton > > > > > > From: shabbona_rr > > > Sent: Saturday, August 31, 2013 4:11 PM > > > To: [email protected] <mailto:S-Scale%40yahoogroups.com> > > > Subject: {S-Scale List} Re: Admin - "New Format" > > > > > > > > > OK, back to modeling, here's one for you - where do I find these > > little bitty solder type connectors for working on models. It seems > > the Chinese have no trouble finding them, and I assume that most > > knowledgeable modelers find them on a rack at their local CVS pharmacy > > or local hobby shop, but that doesn't work for me, nor do some of > > these mega-mailorder electronic warehouse with 10,000 choices and no > > photos or descriptions to help dummies like me. > > > > > > Help, please, > > > > > > boB Nicholson > > > > > > --- In mailto:S-Scale%40yahoogroups.com, "Bill Lane" <bill@> wrote: > > > > > > > > Since the new Yahoo format has not run us all over yet let's keep > > list posts > > > > off this topic. Once it is here for all we will have to deal with it. > > > > Otherwise there is a minute chance it will go away if there is enough > > > > complaining.. > > > > > > > > > > > > > > > > Back to things modeling. > > > > > > > > > > > > > > > > Thank You, > > > > Bill Lane > > > > > > > > Modeling the Mighty Pennsy & PRSL in 1957 in S Scale since 1987 > > > > > > > > See my finished models at: > > > > <http://www.lanestrains.com/> http://www.lanestrains.com > > > > Look at what has been made in PRR in S Scale! > > > > > > > > > > > > > > > > See my layout progress at: > > > > > > > > <http://www.lanestrains.com/My_Layout.htm> > > > > http://www.lanestrains.com/My_Layout.htm > > > > > > > > Custom Train Parts Design > > > > <http://www.lanestrains.com/SolidWorks_Modeling.htm> > > > > http://www.lanestrains.com/SolidWorks_Modeling.htm > > > > > > > > PRR Builders Photos Bought, Sold & Traded > > > > (Trading is MUCH preferred) > > > > <http://www.lanestrains.com/PRRphotos.xls> > > > > http://www.lanestrains.com/PRRphotos.xls > > > > > > > > ***Join the PRR T&HS*** > > > > The other members are not ALL like me! > > > > <http://www.prrths.com/> http://www.prrths.com > > > > <http://www.lanestrains.com/PRRTHS_Application.pdf> > > > > http://www.lanestrains.com/PRRTHS_Application.pdf > > > > > > > > Join the Pennsylvania Reading Seashore Lines Historical Society > > > > It's FREE to join! <http://www.prslhs.com/> http://www.prslhs.com > > > > Preserving The Memory Of The PRSL > > > > > > > > > > > > ------------------------------------ Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/S-Scale/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/S-Scale/join (Yahoo! ID required) <*> To change settings via email: [email protected] [email protected] <*> To unsubscribe from this group, send an email to: [email protected] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
