Some one on the Model RR Structures list posted this site. http://www.trevinocircle.com/adsigns.asp I am in the process of getting a display model ready for a show tomorrow and remembered I had downloaded these signs before. I needed some large signs for the side of a building like they used to do in the 40s & 50s. and didn't have any decals or dry transfers that were large enough. I also didn't have time to make a decal sheet. What I did do is isolate a sign and size it to where I wanted it. I took a piece of tissue paper that comes in the packages of Evergreen sheet stock. It has a dull side and a shiny side. I taped the shiny side down to a piece of regular copy paper and then printed the sign I wanted. Took some yellow glue and diluted it down to almost water and placed my sign (after I cut it out of course) onto the area and with a very soft bristle brush worked from the center out settling it into all the brick crevices. Now I have a use for all those tissue sheets that are hanging around! Dayna Warner CEO Trainstuff LLC www.trainstuffllc.com
[Non-text portions of this message have been removed] S-Trains list sponsor: http://www.americanflyertrains.com All the Flyer you desire...books and accessories too! To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED] Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
