Hold the 762 (2-in-1 whistle) control button facing toward you. Turn it
over so that the red button is on the left and the green button is on the
right of what is now the underside. You should see four connectors along
the top and two connectors along the bottom. The red wire of the rainbow
gets connected to the far left of the top four connectors. The yellow wire
of the rainbow gets connected to the "next to right" of the top four
connectors. The green wire of the rainbow gets connected to the far right
of the top four connectors. The black wire of the rainbow gets connected to
the left one of the bottom two connectors. That takes care of the four
wires coming into the control box.
The yellow wire that gets connected to the fixed voltage post on the
transformer comes off the same post (i.e., "next to right") that the
incoming yellow wire was connected to. The black wire that gets connected
to the base post of the transformer comes off the same post (i.e., left one
of the bottom two connectors) that the incoming black wire was connected to.
That takes care of the two wires coming out of the control box.
There is one more wire on my button. It is a small black one that
connects from the "next to left" of the top four connectors to the same
connector (i.e., the far right one) that the incoming green wire was
connected to.
That's the way mine is wired. Hop ethis works for you.
S-Trains list sponsor: http://www.americanflyertrains.com
All the Flyer you desire...books and accessories too!
To UNSUBSCRIBE from this list send a note to [EMAIL PROTECTED]
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
