This updated advisory is a follow-up to the advisory update titled ICSA-20-161-04 Siemens SIMATIC, SINAMICS, SINEC, SINEMA, SINUMERIK (Update J) that was published April 14, 2022, to the ICS webpage on www.cisa.gov/ics.
Siemens has released updates for the following affected products and is working on further updates. For the remaining affected products, Siemens recommends specific countermeasures until fixes are available: Tia Portal V13 Sp1 Update 4 *Download* https://t.co/5HUsTO8bg1 (background) I downloaded the x3 fraction files as offered on the update download web page. In other words.. I did not use the TIA Updater software. After downloading I ran the executable file (Totally_Integrated_Automation_Portal_V13_SP1_Upd7.exe), but I specified that the installer should only combine and extract the files. No install procedure as I could not wait a long time for the installation to finish. When click "Upload device as new station..." Tia software inform that "Hardware configuration uploaded succesful". But after that a popup "Loading configuration from device" on, the software is hang on for a while then an other popup "The totally intergrated automation portal has encountered a problem and needs to closed". eebf2c3492 -- You received this message because you are subscribed to the Google Groups "s3ql" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To view this discussion on the web visit https://groups.google.com/d/msgid/s3ql/11fd60e5-fce3-43f3-9c09-66c8f64cb83en%40googlegroups.com.
