******************************************************************************************
This message has been scanned and verified as virus free by Symantec
AntiVirus and Filtering
******************************************************************************************
Dirk,
I have SA 3.3.1135 and have also just re-downloaded CountFiles from the
website but I still only have EXE 1.0.0.8 - how does one get 1.0.0.9?
Cheers,
Anthony
"Dirk Bulinckx"
<[EMAIL PROTECTED] To: <[EMAIL PROTECTED]>
u> cc:
Sent by: Fax to:
salive-owner@wood Subject: RE: [SA-list] Help with an
addin
stone.nu
14/12/02 08:58
Please respond to
salive
Add logging=yes to the commandline and try it again.
Then check a file called COUNTFILES.LOG in the same directory as the
countfiles EXE file.
(will work with EXE 1.0.0.9 of countfiles)
dirk.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Kurt Buff
Sent: Fri Dec 13 10:27 PM
To: '[EMAIL PROTECTED]'
Subject: RE: [SA-list] Help with an addin
Dirk,
Thanks for the response.
Tried your suggestion, without success. Also tried with my own credentials
in the .ini file, and using my personal mapped drive.
I've tried the two following command lines, as well:
C:\Program Files\Salive>countfiles ini=countfiles.ini section=Avante
and
C:\Program Files\Salive>countfiles ini="c:\Program
Files\Salive\countfiles.ini" section=Avante
Anthing else?
-----Original Message-----
From: Dirk Bulinckx [mailto:[EMAIL PROTECTED]]
Sent: Friday, December 13, 2002 12:37
To: [EMAIL PROTECTED]
Subject: RE: [SA-list] Help with an addin
If the E drive points to the drive on the remote system then try
Path=\\zet-avante-01\e$\avante9\flodata\live\live.data\FOI.OUTBOX\
dirk.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On
Behalf Of Kurt Buff
Sent: Fri Dec 13 9:16 PM
To: '[EMAIL PROTECTED]'
Subject: [SA-list] Help with an addin
All,
I'm running V3.1.1043, and am having problems with the countfiles addin. I
think I'm not getting the .ini file correct, but if someone could give me a
little advice I'd appreciate it.
I've been trying to test it from a Win2k CMD prompt, and echoing
%errorlevel% by hand afterwards, but it always returns a 0, even though
there are files in the directory.
The .ini file is as follows:
[Avante]
Path=e:\avante9\flodata\live\live.data\FOI.OUTBOX\
Pattern=*.*
Directory=T
UserName=zetron\_service
Password=Not the real password
Server=zet-avante-01
It does have a blank line at the end, and the e: in the path specification
is the e: drive that is local to the server, although I've also use the
mapped drive specification and used the machine on which SA is installed as
the server parameter. I'm not sure what the Directory=T specification is,
but I've tried it with the supplied parameter and without, and have tried
deleting the Directory= entry from the .ini entirely - no joy.
Thoughts?
Kurt Buff
Sr. Network Administrator
Zetron, Inc.
425.820.6363 x463
[EMAIL PROTECTED]
PO Box 97004
Redmond, WA 98073
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
To unsubscribe from a list, send a mail message to [EMAIL PROTECTED]
With the following in the body of the message:
unsubscribe SAlive
