OOOPS, sorry, never noticed that bit. Thanks!!! Mike
>>> [EMAIL PROTECTED] 11/17/03 09:17AM >>> You have depends on UP and depends on DOWN, so the answer is YES. dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Shook Sent: 17 November, 2003 3:14 PM To: [EMAIL PROTECTED] Subject: [SA-list] run check if dependor check fails... Is there a way to run a check only when it's dependor check fails? I'm looking at the IPX Pings, and the best practices from Novell state: ------------------------- ABSTRACT: How do you discover whether an IPX server is alive? DETAILED DESCRIPTION The preferred method is to send an IPX PING packet to socket 0x9086. This is part of the IPX Ping protocol developed with IPXRTR. If the router is not loaded, send a diagnostic packet to the NetWare Diagnostic Responder at socket 0x456. First send ping, and if no response, send diagnostic request. If both fail, the server is not alive. ------------------------------------------- Thanks!!! Michael Shook Business Continuity Analyst Saddle Creek Corporation 723 Joe Tamplin Industrial Blvd Macon GA 31217 478 742 8740 ext. 105 (work) 478 256 9318 (mobile) 478 742 7917 (fax) [EMAIL PROTECTED] http://www.saddlecrk.com To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive