Yep full right to Zdrive - I am admin on both computers and established the Zdrive for the purposes.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Dirk Bulinckx Sent: 09 January 2004 15:11 To: [EMAIL PROTECTED] Subject: RE: [SA-list] setup output html upload help required Was that the pagename? Then make sure that the user running SA has rights to the Z drive and knows the Z drive. Check the logfile for that, often it will show an error in that case. Dirk. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Andy Swarbrick Sent: Friday, January 09, 2004 3:12 PM To: [EMAIL PROTECTED] Subject: RE: [SA-list] setup output html upload help required Sorry, no spaces. My page name setting that did NOT work was Z:\ss\ServerStatus.htm I tried htm and html, upper and lower case. Btw Z drive over the network. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Richard Temple Sent: 09 January 2004 13:41 To: [EMAIL PROTECTED] Subject: RE: [SA-list] setup output html upload help required Could the be a problem referencing a directory with spaces in it ? I have always tended to use the c:\progra~1 rather than c:\program file - can't remember whether I did this because I saw a problem. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of gene Martinez Sent: 09 January 2004 13:31 To: [EMAIL PROTECTED] Subject: RE: [SA-list] setup output html upload help required No, you can have it point to any directory you want.. At 01:02 PM 1/9/04 -0000, you wrote: >Gene > >Got it working now. My current feeling is that Page name must ONLY be >an entry name -not a "dir\filname" combination. > >Andy > >-----Original Message----- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >Behalf Of gene Martinez >Sent: 09 January 2004 12:55 >To: [EMAIL PROTECTED] >Subject: RE: [SA-list] setup output html upload help required > > >At 08:24 AM 1/9/04 -0000, you wrote: >>Gene, >> >>Thanks for coming back. I have tried VERY hard to set up >>setup/output/html page/default page properly. I have succeeded in >>publishing to a local directory quite satisfactorily. But FTP'ing is something else. >> >>I think my problem is to do with "page name" and/or "remote name" - >>what they supposed to MEAN, and what are typical values. >> >>a) Page name > >Page name is the name and location that the file is created to on the >local drive. ie: >c:\salive\salive.html >Also make sure that (Publish this webpage) is checked > >When ftping the page name is the file (html) that you want to ftp. You >can have more than (1) htlm page generated by salive and this lets you >select which (1) you want to work on and what you would like to do with it. ie: >ftp > >>I have worked out that this MUST resolve to a local file such as >>"c:\abc.html" (the edit box has a "..." button next to it which helps >>encourage this interpretation). And indeed anything that is not a valid >>filename such as "fred" generates errors. When FTP'ing what is the >>usage >of >>Pagename? What does it mean to have an entry here? Surely template >>or header/footer are parsed to create the entire final server status page. >>Also this file MUST exist. >> >>b) Remote name > >Remote name is the name you want to give to the file that you have >ftp'ed, You may call it output.html on the local computer but need (or >want) to call it mylist.html on the server your sending it to. >Also you have it listed wrong below you have it as "\docs\popg\ss.html" >this is not correct >it should be docs/popg/ss.html no double quots and froward slash > >>This entry is at least badly documented. I initially thought was just >>some random name so I left it blank. Later I worked out it might mean >>the directory where the server status file was to be stored so I put >>in "/docs/popg". Errors in the log showed that to be wrong. Finally >>putting in "\docs\popg\ss.html", i.e. a directory and filename works - >>in that the error looks different. >> >>I have tried every permutation and combination in these boxes >>imaginable - no success. I have read and re-read all the >>documentation, I have read the FAQ and searched the archives. And I am quite stuck right now. >> >>My current values for these fields are >> page name = Z:\ss\ss.htm >> remote name = \docs\ss.htm <- change to docs/ss.html >but in looking above it should be docs/popg/ss.html > >Let me know if this gets you going in the right direction > >> >>Andy >>PopG >> >> >> >>-----Original Message----- >>From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] >>Behalf Of gene Martinez >>Sent: 09 January 2004 02:01 >>To: [EMAIL PROTECTED] >>Subject: Re: [SA-list] setup output html upload help required >> >> >>Got to setup/output/html page/defaultpage (it that is what you have >defined) >>check - publish this web page >>page name - should have the directory and pagename.html upload via - >>ftp ftp server - name remote file name - what do you wish to call file >>user name password >> >>it works I'm sending (1) to the web everytime it runs... >> >> >>At 01:30 AM 1/9/04 -0000, you wrote: >>>Ok I am a new user with a fresh download trying to monitor four servers. >>>Nothing I can do enables me to upload output to my web server. I am >>>used >>to >>>posting files to the server - but salive generates the log file >>> >>>09 January 2004 01:25:14 Web page generation Default page >>>09 January 2004 01:25:16 ERR FTP: problem during upload: Requested >>>action not taken. File unavailable (e.g., file not found, no access). >>>( 40550) >>> >>>I have checked files exist - many times. tried all sorts of >>>different things - no avail, >>> >>>Help! >>> >>>Andy >>> >>Regards, >> >>Gene >> [EMAIL PROTECTED] >> http://www.eclipse.net/~njkat >> >>To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >>With the following in the body of the message: >> unsubscribe SAlive >> >> >Regards, > >Gene > [EMAIL PROTECTED] > http://www.eclipse.net/~njkat >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > >To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] >With the following in the body of the message: > unsubscribe SAlive > > Regards, Gene [EMAIL PROTECTED] http://www.eclipse.net/~njkat To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive To unsubscribe from a list, send a mail message to [EMAIL PROTECTED] With the following in the body of the message: unsubscribe SAlive