Just a thought, but given that this is all Proliant kit
and that each of these events is reportable in Insight Manager, you could see if
SNMP checks give you more defined results than event log checks. Ignore if
already covered here...
You could of course use Insight Manager instead,
but then it's not as flexible as S'Alive : ).
//Steve
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Troy Bruder
Sent: den 24 juni 2005 21:15
To: [email protected]
Subject: RE: [SA-list] event log check
...
Here's the deal.. I want to monitor every HP Proliant server we
have for the following:
1. Failed hard drives
2. Hard drives in recovery mode (after someone plugs in a new hot
swap drive to fix #1 from above)
3. Hard drive recovery complete
4. Power Supply failure
5. Power Supply recovery
The other day, a power supply failed in a server when SA was NOT
running...... SA was then restarted. Four hours later, a
new power supply was delivered and installed in the server. SA never
picked up the event log message.. I was monitoring for Event ID:
1118 Informational with a description of "returned to the OK
state".
Troy
