I had a couple a while ago that worked pretty well. Unfortunately I don’t have a sample to send at the moment.
I found it most helpful to use ldifde from the command line on the computer running Servers Alive to test my queries and make adjustments to my syntax. Also, authentication can be an issue depending on how your LDPA server is configured. Make sure you are testing from the same account that will be running the actual query. Steve From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Wuichner, Eric Sent: Wednesday, February 14, 2007 12:46 PM To: Servers Alive Discussion List Subject: [SA-list] LDAP monitor Has anyone worked up a check in SA to check LDAP on a server with a defined query looking for a specific response? Thanks, Eric To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. To unsubscribe send a message with UNSUBSCRIBE as subject to [email protected] If you use auto-responders (like out-of-the-office messages), then make sure that they are not send to the list nor to the individual members of the list that send a message. Doing this will get you removed from the list. ------------------------------------------------------------- This message has been scanned by Postini anti-virus software.
