SNMP Setup etc. Hi All,
I am trying to setup an SNMP check (and I know nothing about SNMP) for a temperature probe. The agent sent me a MIB file and I added it to the MIB database. This add gave no errors. When I run the check I get an error "noSuchObject" How do I know if the MIB file provided is what is needed and what does that error message mean. I suspect it means that the MIB file is not what is required. Any assistance greatly received. Thanks - Russell +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ Russell Renton Senior Information Technologist (Ops/Comms) Horizons Regional Council (Horizons Regional Council is the trading name of the Manawatu-Wanganui Regional Council) Phone : +64 6 952 2900 Fax : +64 6 952 2929 Cellphone : 021 2277 277 http://www.horizons.govt.nz (http://www.horizons.govt.nz) +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ "If 99% is good enough, then gravity will not work for 14 minutes every day." Horizons Regional Council | 24 hr freephone 0508 800 800 | www.horizons.govt.nz (http://www.horizons.govt.nz) This email is covered by the disclaimers which can be found by clicking here (http://www.horizons.govt.nz/default.aspx?pageid=219). To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.