Some update on this. There was indeed an issue in Servers Alive (probably introduced in one of the beta builds) were the EXTERNAL COM check in combination with the SECOND KNOCK option could loose it's configuration settings. This problem/bug is fixed in build 2265 (or more recent). The latest beta build can be found on http://beta.woodstone.nu
Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of Dirk Sent: Thursday, October 09, 2008 5:50 PM To: Servers Alive Discussion List Subject: RE: [SA-list] Lots of checks failed after upgrade Did that path then include an IP address? Do you still have a backup of the "old" entriesfile? And does that load correctly? If not then can you send me (offlist) the entries file? Dirk Bulinckx. -----Original Message----- From: Servers Alive Discussion List [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Thursday, October 09, 2008 5:45 PM To: Servers Alive Discussion List Subject: [SA-list] Lots of checks failed after upgrade Hello Dirk etc. I just recently updated 6.1.2249 to 6.1.2264 and after that a lot of External Com checks, Count files are corrupted. The path to the folder is changed to just the ip-address. Also is the alarm level is erased (empty) Any idee about how to solve the problem? Best regards Per -- ______________________________________________ Per Ohlsson It-department FlexLink AB +46 702 87 3244 +46 31 337 3244 The contents of this e-mail are intended for the named addressee only. It contains information which may be confidential and which may also be privileged. The information including attachments in this e-mail may not be used, disclosed, copied or stored except for the purpose for which it has been sent. If you have received this e-mail in error, please immediately destroy it and notify us by phone or fax as above or by e-mail at: [EMAIL PROTECTED] Please note that FlexLink can assume no liability for any computer virus which might be transferred by way of this e-mail. Further information about FlexLink: www.flexlink.com To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.= To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.= To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.