Re: [SA-list] global replace If you set the second check dependent on the first, wouldn't that be more like what he really wants? That's how I do my escalations typically... and the the second check never runs if the first is good! Saves time on the whole cycle of checks too Greg
-------------------------------------------------------------------------------- From: Servers Alive Discussion List [mailto:sal...@woodstone.nu] On Behalf Of Dirk Bulinckx Sent: Friday, September 18, 2009 12:41 PM To: Servers Alive Discussion List Subject: Re: [SA-list] how do I setup escalation You create 2 alerts: 1st alert is on "1 down" and send to the 1st address 2nd alert in on "3 down" and send to those 2 addresses. Dirk Bulinckx ----- Original Message ----- From: Heath Abbate (mailto:habb...@cafepress.com) To: Servers Alive Discussion List (mailto:salive@woodstone.nu) Sent: Friday, September 18, 2009 6:25 PM Subject: [SA-list] how do I setup escalation I want an alert to fire off on the first down to one email address and then if it’s still down 3 cycles later it fires off to that same email plus another escalation email address. How do I accomplish this with SALVE? ------------------------------------------------------------------------------------------- The contents of this message, together with any attachments, are intended only for the use of the individual or entity to which they are addressed and may contain information that is confidential and exempt from disclosure. If you are not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this message, or any attachment, is strictly prohibited. If you have received this message in error, please notify the original sender immediately by telephone or by return E-mail and delete this message, along with any attachments, from your computer. Thank you. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.
