Dirk, The comfileproperties.dll reports a version of 2.0.0.49, this is the same version that was working on the older installation, as I have all these installation version from when the old system was implemented.
I have not previously updated the version of Servers Alive as on the old (dead) Windows XP Pro SP3 installation was working fine. Should I really be upgrading to the latest version of Servers Alive now that I have had to move onto the Windows 2008 Server platform? Regards, Andy -----Original Message----- From: Servers Alive Discussion List [mailto:salive@woodstone.nu] On Behalf Of Dirk Sent: 03 August 2011 11:46 To: Servers Alive Discussion List Subject: RE: [SA-list] FileProperties Configuration problem Servers Alive v6.1 (and v6.2) are NOT supported on Windows 2008. What version of the COM check are you using? -----Original Message----- From: Servers Alive Discussion List [mailto:salive@woodstone.nu] On Behalf Of Carroll, Andrew Sent: Wednesday, August 03, 2011 12:31 PM To: Servers Alive Discussion List Subject: [SA-list] FileProperties Configuration problem Servers Alive Discussion List, I have had to move my Servers Alive implementation from a Windows XP Pro SP3 workstation to a Windows 2008 Server SP1 (32 bit) platform due to the failure of the hardware on the workstation. I was able to recover my hostfile and the registry and group settings from the old system and implement these on the new system after a standard install, and all appears to working OK. I have however spotted an issue with an External COM check, where I am not able to Configure the external check parameters. A number of my checks use the External COM check "FileProperties Check" and it seems that I am unable to use the Configure option at the moment. Does anyone have any clues why this is not working under Windows 2008 Server SP1 when it worked fine under Windows XP Pro SP3. Servers Alive Enterprise Version 6.1.2004 Windows 2008 Server SP1 (32 bit) Regards, Andy To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list. To unsubscribe send a message with UNSUBSCRIBE in the subject line to salive@woodstone.nu If you use auto-responders (like out-of-the-office messages), make sure that they are not sent to the list nor to individual members. Doing so will cause you to be automatically removed from the list.