unsubscribe -----Original Message----- From: Jarek Adamski <[EMAIL PROTECTED]> To: sam-users@nvg.ntnu.no <sam-users@nvg.ntnu.no> Date: Monday, June 21, 1999 3:47 AM Subject: Re: "*.TAP" files in ZXVGS
>Hi! > >Dnia 99-06-19 James Gasson pisze: > >> Well then, you'd better tell me how I can get hold of a copy, >> so I can evaluate the competition. ;-) >Wow! At once the competition. I only was looking for users for >my software... :-) Never mind... > >To get working ZXVGS on SAM through Internet is a bit >complicated procedure because of the only one filesystem >implemented now in ZXVGS is CP/M 2.2 one. :-( > >So you will need: > - about 300KB "CPM22QED.LHA" uuencoded file that I will send; > - uudecode program; > - unlha program; > - 3.5" floppy disk formatted to 72KB in MS-DOS; > - second 3.5" floppy disk for CP/M installation; > - "ZXVGS.guide" file; > - AmigaGuide program to read it comfortably (or WINGUIDE.EXE). > > >Mentioned "ZXVGS.guide" should be in "VGSguide.lha" on: > >http://nautilus.uwoj.krakow.pl/zxland/ > >Otherwise ask "[EMAIL PROTECTED]" how to get my >files. > > >The procedure is: > 1. Uudecode file "CPM22QED.LHA". > 2. Unlha it. > 3. Copy file "CPM22QED.106" to empty 720KB MS-DOS disk. > 4. Boot SAM from it using e.g. <F9>. > 5. CPM22QED will copy all files to ramdisk. > 6. Insert new disk (not necessary). ;-) > 7. Format it to 820KB using: > >QFORMAT 0:DISKNAME /QED820 > > 8. Copy all files to this disk using: > >PPIP A:*.* B: > > 9. Make the disk bootable using: > >SYS22QED B: > > 10. Reset SAM. You can use: > >RESET > > 11. Boot SAM from the 820KB disk. > >In case of troubles write to me. :-) > > >On the disk there will be ZXVGS 0.13 that doesn't load >"*.TAP"... :-) The file "VGSSAM.COM". > >Then I'll send soon short archive with new "VGSSAM.COM" and >"R-MSDOS.COM". > >The R-MSDOS program reads files from 720KB MS-DOS disks and >copies them to M: (ramdisk). You should PPIP them to A: (floppy >disk) before use. This way you will be able to load new ZXVGS >version and new R-MSDOS program that allows load "*.TAP" files >from MS-DOS. The current R-MSDOS will not save "end marker" with >"*.TAP" file, what is required in CP/M filesystem. > > > >> ----- The following addresses had permanent fatal errors ----- >> <[EMAIL PROTECTED]> >> (expanded from: <[EMAIL PROTECTED]>) > >> ----- Transcript of session follows ----- >> mail.local: unknown name: no.spam.james.gasson >> 550 <[EMAIL PROTECTED]>... User unknown >And tell me where to I could send uuencoded "CPM22QED.LHA" file. > > >-- >Yarek. >
