The autobuild test system (on sn-devel-184) has detected an intermittent failing test in the current master tree.
The autobuild log of the failure is available here: https://git.samba.org/autobuild.flakey.sn-devel-184/2019-06-06-0358/flakey.log The failure seems to be in the "samba-nt4" suite, whose build logs are available here: https://git.samba.org/autobuild.flakey.sn-devel-184/2019-06-06-0358/samba-nt4.stderr https://git.samba.org/autobuild.flakey.sn-devel-184/2019-06-06-0358/samba-nt4.stdout The top commit at the time of the failure was: commit a66af4c96accba4ee64eeb1958458b69f3ccec1d Author: Ralph Boehme <s...@samba.org> Date: Mon May 13 20:16:47 2019 +0200 s3:auth: explicitly add BUILTIN\Guests to the guest token This changes ensures that smbd always adds BUILTIN\Guests to the guest token which is required for guest authentication. Currently the guest token depends on the on-disk configured group mappings. If there's an existing group mapping for BUILTIN\Guests, but LOCALSAM\Guest is not a member, the final guest token won't contain BUILTIN\Guests. For SMB2 the flag SMB2_SESSION_FLAG_IS_GUEST will not be set in the final SMB2 SESSION_SETUP response, because smbd sets it based on the token containing the BUILTIN\Guests SID S-1-5-32-546. At the same time, the packet is not signed which causes Windows clients and smbclient to reject the unsigned SMB2 SESSION_SETUP response. BUG: https://bugzilla.samba.org/show_bug.cgi?id=13944 Pair-programmed-with: Stefan Metzmacher <me...@samba.org> Signed-off-by: Ralph Boehme <s...@samba.org> Reviewed-by: Andrew Bartlett <abart...@samba.org> Autobuild-User(master): Andrew Bartlett <abart...@samba.org> Autobuild-Date(master): Wed Jun 5 16:55:26 UTC 2019 on sn-devel-184 and the last 50 lines of the stdout log were: [157(859)/591 at 16m52s] samba3.base.rename(nt4_dc) [158(860)/591 at 16m53s] samba3.base.rw1(nt4_dc) [159(861)/591 at 16m54s] samba3.base.rw1(nt4_dc) [160(862)/591 at 16m55s] samba3.base.rw1(nt4_dc) [161(863)/591 at 16m56s] samba3.base.secleak(nt4_dc) [162(864)/591 at 16m56s] samba3.base.tcon(nt4_dc) [163(865)/591 at 16m57s] samba3.base.tcondev(nt4_dc) [164(866)/591 at 16m58s] samba3.base.trans2(nt4_dc) [165(867)/591 at 17m1s] samba3.base.unlink(nt4_dc) [166(868)/591 at 17m2s] samba3.base.vuid(nt4_dc) [167(869)/591 at 17m3s] samba3.base.xcopy(nt4_dc) [168(870)/591 at 17m3s] samba3.base.samba3error(nt4_dc) [169(871)/591 at 17m4s] samba3.raw.acls(nt4_dc) [170(883)/591 at 17m8s] samba3.raw.acls nfs4acl_xattr-simple-40(nt4_dc) [171(895)/591 at 17m13s] samba3.raw.acls nfs4acl_xattr-special-40(nt4_dc) [172(907)/591 at 17m19s] samba3.raw.acls nfs4acl_xattr-simple-41(nt4_dc) [173(919)/591 at 17m22s] samba3.raw.acls nfs4acl_xattr-xdr-40(nt4_dc) [174(931)/591 at 17m25s] samba3.raw.acls nfs4acl_xattr-xdr-41(nt4_dc) [175(943)/591 at 17m28s] samba3.raw.acls nfs4acl_xattr-nfs-40(nt4_dc) [176(955)/591 at 17m32s] samba3.raw.acls nfs4acl_xattr-nfs-41(nt4_dc) [177(967)/591 at 17m35s] samba3.raw.chkpath(nt4_dc) [178(968)/591 at 17m36s] samba3.raw.close(nt4_dc) [179(969)/591 at 17m37s] samba3.raw.composite(nt4_dc) [180(973)/591 at 17m40s] samba3.raw.eas(nt4_dc) [181(974)/591 at 17m41s] samba3.raw.lock(nt4_dc) [182(987)/591 at 18m16s] samba3.raw.mkdir(nt4_dc) [183(988)/591 at 18m17s] samba3.raw.mux(nt4_dc) [184(989)/591 at 18m20s] samba3.raw.notify(nt4_dc) TESTING CHANGE NOTIFY COMPLETION FILTERS Testing mkdir UNEXPECTED(failure): samba3.raw.notify.mask(nt4_dc) REASON: Exception: Exception: ../../source4/torture/raw/notify.c:835: notify.nttrans.out.changes[0].action was 2 (0x2), expected 1 (0x1): nchanges=1 action=2 expectedAction=1 filter=0x00000004 FAILED (1 failures, 0 errors and 0 unexpected successes in 0 testsuites) A summary with detailed information can be found in: ./bin/ab/summary TOP 10 slowest tests samba3.blackbox.net.rpc.conf(nt4_dc) -> 158 samba3.blackbox.net.local.conf(nt4_dc:local) -> 85 samba3.base.dir2(nt4_dc) -> 44 samba3.raw.lock(nt4_dc) -> 35 samba3.blackbox.smbclient_s3.NT1.crypt (nt4_dc)(nt4_dc) -> 32 samba3.blackbox.smbclient_s3.SMB3.crypt (nt4_dc)(nt4_dc) -> 31 samba3.smbtorture_s3.crypt_client.OPLOCK1(nt4_dc) -> 31 samba3.blackbox.smbclient_s3.SMB3.plain (nt4_member) member creds(nt4_member) -> 30 samba3.blackbox.smbclient_s3.NT1.plain (nt4_dc)(nt4_dc) -> 29 samba3.blackbox.smbclient_s3.NT1.plain (nt4_member) member creds(nt4_member) -> 29 ERROR: test failed with exit code 1 Makefile:16: recipe for target 'test' failed