I have RH 7.2, with Samba 2.2.1a, and LPRng printing system. I have two printers, HP DeskJet 1220C and HP LaserJet 5.
When a user send many jobs to the printer after a short period of time the server sends a message that the server is not accesible or is not connected to the network, but any other user can do it, again, after some jobs sent to the printer the server doesn´t accept any connection from that client. I read the FAQ of LPRng, and it says that you must change the number of ports in your lpd.conf file, but it has the correct number of ports. ==================obtained from www.lprng.org ============================= SOLUTION: It appears that most RFC1179 implementations do not check for the exact port range 721-731, but only that the connection originates from a reserved port, i.e. - in the range 1-1023. You can extend the range of ports used by LPRng by changing the originate_port=721 731 value in the defaults (LPRng/src/common/defaults.c) file or in the lpd.conf file. I recommend the following: originate_port=512 1022 <--- I have this numbers. ======================================================================== What could be my problem?? regards. Ing. Claudio Hernández. Sistemas OPM Tel. 83-54-72-60 Ext. 259 Skytel Tel. 83190779 Pin: 5996543 e-mail: [EMAIL PROTECTED] La información contenida o adjunta a este mensaje es clasificada como No-Pública, de carácter privado y confidencial, es propiedad de Proeza, sus afiliados y/o subsidiarias que en conjunto denominaremos Proeza y no puede ser reproducida, revelada o transmitida a terceros o ser utilizada para propósitos no definidos dentro de los términos comercialmente aceptables por el receptor del mensaje, sus colaboradores o asociados sin el consentimiento previo y por escrito por parte de Proeza. Estas restricciones son adicionales a cualquier acuerdo paralelo que se hubiese establecido entre las partes en términos de acuerdos, contratos o convenios de Confidencialidad o similares entre Proeza y el receptor de este mensaje. The information contained in or attached to this message, to the extent it is non-public, is the confidential, proprietary information of Proeza.,its affiliates and/or subsidiaries (collectively, "Proeza") and may not be reproduced, disclosed to any third party or used by the recipient and/or the recipient's employer (hereinafter "recipient"), for other than the intended purpose for which it was provided to the recipient, without the prior written approval of Proeza. These restrictions are in addition to any restrictions that may apply pursuant to the terms of any Confidentiality or Non-Disclosure Agreement(s) between Proeza and the recipient -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba