Thanks for your help, you were right.
port 445 was filtered on the gateway.


t...@tms3.com a écrit :
SNIP


Samba is installed on the server (192.168.0.1/24), and smbclient is
available on the client (192.168.1.1/24), connected thru a gateway.

If you cannot connect to the server via IP addy, such as

\\192.168.0.1\<share>

then, it is very likely ports 137, 138, 139, and 445 are blocked (certainly 139 and 445 are). Resolve this first.



the problem is that i can't connect to the server from another subnet
via samba.

here is smb.conf from the server (taken from the o'reilly book 'using
samba'):

[global]
netbios name = server
workgroup = GARDEN
wins support = yes
dns proxy = yes
[test]
comment = For testing only, please
path = /export/tmp
read only = no

server side:
[r...@server etc]# ping client
PING client (192.168.1.1) 56(84) bytes of data.
64 bytes from client (192.168.1.1): icmp_seq=1 ttl=63 time=0.924 ms

[r...@server etc]# smbclient -L server -N
Anonymous login successful
Domain=[GARDEN] OS=[Unix] Server=[Samba 3.0.37]

Sharename       Type      Comment
---------       ----      -------
test            Disk      For testing only, please
IPC$            IPC       IPC Service (Samba 3.0.37)
...

[r...@server etc]# iptables -L
Chain INPUT (policy ACCEPT)
target     prot opt source               destination

Chain FORWARD (policy ACCEPT)
target     prot opt source               destination

Chain OUTPUT (policy ACCEPT)
target     prot opt source               destination

client side:
[r...@client]# ping server
PING server (192.168.0.1) 56(84) bytes of data.
64 bytes from server (192.168.0.1): icmp_seq=1 ttl=63 time=0.497 ms

[r...@client]# smbclient -L server -N
Connection to hercule failed (Error NT_STATUS_UNSUCCESSFUL)

when i connect from another client (located on the server's subnet, ie
192.168.0.2/24), it works:

-bash-3.2$ smbclient -L server -N
Anonymous login successful
Domain=[GARDEN] OS=[Unix] Server=[Samba 3.0.37]

Sharename       Type      Comment
---------       ----      -------
test            Disk      For testing only, please
IPC$            IPC       IPC Service (Samba 3.0.37)
...

To resume my problem, i can not connect to a samba server from a client
located on another subnet.
Thank for your help.

Julien

--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba


--
To unsubscribe from this list go to the following URL and read the
instructions:  https://lists.samba.org/mailman/options/samba

Reply via email to