Hi.
On 02.12.2010 15:02, Christopher Chan wrote:
wbinfo -u/-g should work if the configuration is correct. At least
they work for me on 3.5.4.
Yeah, at least for me it used to work on 3.0.x and 3.4.9. So the
configuration was correct and I guess it's highly unlikely that it
became incorrect after an upgrade.
What are your idmap settings?
I guess they are mostly set to default. I also have the
idmap uid = 20000-30000
idmap gid = 20000-30000
settings. I added the
idmap alloc backend = tdb
but nothing changed.
Nothing about idmap except these string in my config file. And this is
proved to work on earlier versions.
You might want to look in/tail log.winbindd, log.winbindd-idmap and
see what is going on when you issue a winbind -u/-g.
Well, it states only this:
[2010/12/02 18:58:27.644357, 1] ../librpc/ndr/ndr.c:395(ndr_pull_error)
ndr_pull_error(1): String terminator not present or outside string
boundaries
[2010/12/02 18:58:27.644446, 10]
winbindd/winbindd_list_groups.c:128(winbindd_list_groups_done)
Domain SOFTLAB returned 29 users
[2010/12/02 18:58:27.644471, 10]
winbindd/winbindd_list_groups.c:134(winbindd_list_groups_done)
list_groups for domain SOFTLAB failed
[2010/12/02 18:58:27.644498, 10] winbindd/winbindd.c:655(wb_request_done)
wb_request_done[65824:LIST_GROUPS]: NT_STATUS_OK
[2010/12/02 18:58:27.644549, 10]
winbindd/winbindd.c:716(winbind_client_response_written)
winbind_client_response_written[65824:LIST_GROUPS]: deliverd response
to client
[2010/12/02 18:58:27.644656, 6]
winbindd/winbindd.c:816(winbind_client_request_read)
closing socket 50, client exited
There are much more users in SOFTLAB. Much more than 29. Actually, they
are about 2000.
And this is the log level 10.
Sometimes winbind thinks that there probably are much more users in my
domain:
[2010/12/02 19:06:13.750270, 10]
winbindd/winbindd_list_groups.c:128(winbindd_list_groups_done)
Domain SOFTLAB returned 21924496 users
Although the wbinfo -g output is still empty.
Thanks.
Eugene.
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
