On 18/05/2012 08:15, Kai Blin wrote:
On 2012-05-17 14:06, Andrew Bartlett wrote:
Hi Mike,
I've CC'ed Kai, who is our expert on Samba4 on ARM. Hopefully he can
help you out.
I have to admit that so far I've resorted to building natively on the
ARM hardware I run things on. You need a target Python version in your
path, and cross-compiling Python has so far been a stumbling block for me.
The dreamplug is a Kirkwood-based ARMv5, right? With a reasonably fast
disk, I can build on similar hardware in ~2 hours, iirc. Make sure you
have enough RAM, the build takes> 128 megs.
HTH,
Kai
Hi Kai,
I thought I'd give the cross-compile route a further try. To that end,
I've a cross-compiled python and so have it available to put in my path.
However, If I put the 'arm' version at the head of my path, configure
fails immediately as it tries to use it and if I put it at the tail of
my path, then during the configure process, configure finds the native
python and tries to use it, which fails.
Is/are there any configure options to specify which python to use and
when? I guess not.
The configure doesn't want to play nice with distcc either, again due to
the python issue I guess.
Regards,
Mike.
--
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
