Hi Deepak,
I am still struggling with the NTP server configuration.
Is there no method by which I can sync all my domain users with the same
time as on server because I have to face alot of issue due to the same.
I have searched alot but the only thing which I found was to add these two
lines in my ntp.conf
ntpsigndsocket /opt/ad/samba4/var/run/ntp_signd/
restrict default mssntp
I am using CentOS 6 and ntp rpm is 4.2
I guess the version of ntp you are using does not support ntp signing.
You might check the samba4 wiki, it asks for a ntp version 4.2.6 or higher.
https://wiki.samba.org/index.php/Samba4/HOWTO#Step_10:_Configure_NTP_.28Optional.29
After the configuration is straight forward, just add the two lines you
posted above and check the socket path which might change depending on
your compilation/installation.
Cheers,
Denis
I also tried to compile using a tar ntp file with --enable-ntp-signd
Can any one help me please.
Thanks
deepak
--
Denis Cardon
Tranquil IT Systems
Les Espaces Jules Verne, bâtiment A
12 avenue Jules Verne
44230 Saint Sébastien sur Loire
tel : +33 (0) 2.40.97.57.57
http://www.tranquil-it-systems.fr
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
