На 23.10.2012 г. 17:25, Florian Götz написа:
Got the same problem here with Samba 3.6.8.
If you address the the interface directly I get an answer from
nmblookup, if the request is done via broadcast I get none.
Please let me know if you find a solution to that problem.
Regards
Florian Götz
Am 14.10.2012 11:06, schrieb Rieker Flaik:
Hi,
here is a client computer and a server computer (Debian Wheezy, armel,
samba Version 3.6.6, IP address: 192.168.1.2, Name: xyz).
Problem: wins doesn't answer nmblookups by the client on the broadcast
address:
client$ nmblookup -S xyz
querying xyz on 192.168.1.255
name_query failed to find name xyz
Why is that so? How to fix this?
Hello, Rieker and Florian!
I was wondering what version of the linux kernel are you running?
I had a situation, where a bunch of Windows XP machines would not see
their SAMBA server when looked up by Netbios name after I upgraded the
linux kernel from 3.5.6 to 3.6.2. My solution was to revert back to the
linux 3.5.x series, but now the 3.5.x series is officially dead [1].
If the SAMBA server was called by IP, a la "\\192.168.1.1\" - the
windows PCs would see the SAMBA server without problem.
The setup I have is somewhat specific, though, as the SAMBA server has 3
NICs total, and routes traffic to the two subnets it feeds internet and
SAMBA, among other services. The config file I use forces SAMBA to bind
only to the 2 site local network interfaces, if that plays a role.
Because mine is a production setup, I couldn't play with it and look for
where the problem is. So I just switched back to the known good kernel
and called it a day.
My SAMBA version is 3.6.8.
[1] http://article.gmane.org/gmane.linux.kernel/1375014
P.S. I sent this e-mail earlier, but perhaps you did not receive it
because I was not subscribed to the list. Sorry if you are recieving it
twice.
--
Plamen Petrov
--
To unsubscribe from this list go to the following URL and read the
instructions: https://lists.samba.org/mailman/options/samba
