On Sat, 2013-04-13 at 10:11 +1000, Geoff Crompton wrote: > Hi, > > I'm trying to get samba4 4.0.5 tarball to run on a Debian Squeeze > Virtual Machine. I've done a local build, and I've included the > --enable-debug --enable-selftest switches. > > I've done a 'make test', and I get told there are quite a lot of > failures. It ends by saying: > > > FAILED (318 failures, 7 errors and 0 unexpected successes in 431 > testsuites) > > A summary with detailed information can be found in: > ./st/summary > ERROR: test failed with exit code 1 > make: *** [test] Error 1 > > > > How important is it for all the tests to pass? Should I just press on > with a 'sudo make install'?
It's not good, but without seeing them it's rather hard to say more than that. Our tests are highly inter-dependent, so this is probably one or two tests that really go awry, and 300 tests that fail because the server process they run against has died. Andrew Bartlett -- Andrew Bartlett http://samba.org/~abartlet/ Authentication Developer, Samba Team http://samba.org -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba