On Mon, 2013-06-10 at 12:40 -0400, Gerry Reno wrote: > On 06/10/2013 12:16 PM, steve wrote: > > On Mon, 2013-06-10 at 09:54 -0400, Gerry Reno wrote: > >> On 06/10/2013 03:47 AM, steve wrote: > >>> On 09/06/13 20:16, Gerry Reno wrote: > >>>> On 06/09/2013 06:45 AM, steve wrote: > >>>>> On 09/06/13 11:00, Adam Sienkiewicz wrote: > >>>>>> Hi Steve > >>>>>> > >>>>>> I procceeded regarding this howtu. All seems to be fine except > >>>>>> connection samba-cups. From windows I can add printer, print test page > >>>>>> but all print jobs from samba are lost between samba and cups I think. > >>>>>> There is no entries in cups logs only issue in samba logs > >>>>> Hi > >>>>> I just found my eror. i hope it's the same for you: > >>>>> > >>>>> Here is my smb.conf: > >>>>> > >>>>> [printers] > >>>>> path = /var/spool/samba > >>>>> printable = yes > >>>>> printing = CUPS > >>>>> > >>>>> [print$] > >>>>> path = /srv/samba/Printer_drivers > >>>>> comment = Printer Drivers > >>>>> writeable = yes > >>>>> > >>>>> [hpdeskjetf2200series] > >>>>> path = /var/spool/samba/ > >>>>> browseable = yes > >>>>> printable = yes > >>>>> printer name = hpdeskjetf2200series > >>>>> #printer name = "HP Deskjet F2200 series" > >>>>> > >>>>> Note the printer name lines. I had the windows name "HP Deskjet F2200 > >>>>> series" > >>>>> > >>>>> The clue was in the logs: > >>>>> /usr/local/samba/sbin/smbd: Unable to get jobs for > >>>>> ipp://localhost/printers/HP Deskjet F2200 series - > >>>>> client-error-not-found > >>>>> > >>>>> I changed to the Linux/cups printer name and print jobs got sent > >>>>> without error. > >>>>> HTH > >>>>> Steve > >>>>> > >>>>> > >>>> Steve, still not working for me. > >>>> > >>>> What is the output of lpinfo -v on your system? > >>>> > >>>> Gerry > >>>> > >>>> > >>>> > >>>> > >>> Hi Gerry > >>> lpinfo -v > >>> network http > >>> network ipp > >>> network ipps > >>> network https > >>> direct usb://HP/Deskjet%20F2200%20series?serial=CN8BO1S0S605CC > >>> network socket > >>> network lpd > >>> direct hp:/usb/Deskjet_F2200_series?serial=CN8BO1S0S605CC > >>> network smb > >>> direct parallel:/dev/lp0 > >>> network beh > >>> direct hpfax > >>> > >>> I wonder if you have the cups dev libraries and headers installed before > >>> you compile. I didn't so that was another > >>> problem I had. On openSUSE it's cups-devel. Just to make sure, I built > >>> with ./configure --enable-cups > >>> > >>> Suerte, > >>> Steve > >>> > >> > >> Ok, here's lpinfo -v on my test system: > >> # lpinfo -v > >> network ipp > >> network lpd > >> file cups-pdf:/ > >> network socket > >> direct scsi > >> network https > >> network http > >> network socket://192.168.2.180 > >> > >> The last entry is a networked printer > >> > >> I notice that "network smb" is missing. Going to CH10 in the Samba manual > >> I see that it takes a symlink from smbspool. > >> Did you have to do that manually? Or did it just get made during install? > >> > >> Gerry > > Hi > > No idea about the symlink until you mentioned it so it must have been > > made during the install. > > > > > > I don't understand then why my Samba git stable (4.0.6) install doesn't have > this symlink. > $ find . -name config.h > ./source4/heimdal_build/config.h > ./bin/default/include/config.h > > Is there some configure switch that causes this to be generated? > > Gerry > > > Hi I couldn't get it to work with 4.0.6. We have: Version 4.1.0pre1-GIT-56055f7 It's the one you get from here: git://git.samba.org/samba.git
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/options/samba