Noel Kelly [[EMAIL PROTECTED]] wrote: > Hi Thomas, > > Your is a common complaint on this list and typically it always seems to > come back to network hardware problems rather than software. > > Run ifconfig on your interface and see if there are any errors listed. If > you see none then i strongly recommend you swap the cable, NIC, switch/hub - > very good chance this will take you closer to a solution than fiddling with > Samba parameters which are best left on their defaults! > > It has happened to me a couple of times. When the network hardware is > working properly you see great performance from a default Samba install. > > Good luck, > Noel > > NIC on both server and client is set to 100/FD. > I agree with the above it most probebly hardware related. 100/fd can be problematic even with the best gear.
100/fd to a switch or a crossover cable? If it's to a hub then there is our problem. -- *--* Mail: [EMAIL PROTECTED] *--* Voice: 425.739.4247 *--* Fax: 425.827.9577 *--* HTTP://the-penguin.otak.com/~lawrence/ -------------------------------------- - - - - - - O t a k i n c . - - - - - -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
