We have two domains on two physically separate networks, connected via a firewall/router. To my knowledge the firewall system is not set to block anything between the two segments, just to route them.
Network 192.168.18.0, CH domain 192.168.18.14 ch1 (rh7.3, CH domain controller, wins server) 192.168.18.15 ch2 (w2k, app server, set ch1 for wins manually) 192.168.18.18 mtoal (w2k, my computer, set ch1 for wins manually)
Network 192.168.20.0, PW domain 192.168.20.8 pw1 (rh7.3, samba, PW domain controller) 192.168.20.5 pw2 (w2k, app server, set ch1 for wins manually) 192.168.20.61 streetsmary (w2k, example machine, ch1 for wins via dhcp)
ch1 is set up as the WINS server for the whole WAN:
netbios name = ch1
workgroup = ch
os level = 64
preferred master = yes
domain master = yes
local master = yes wins support = yes
remote announce = 192.168.18.255 192.168.20.255
remote browse sync = 192.168.18.255 192.168.20.255
name resolve order = wins lmhosts
pw1 is set up to use ch1 as it's WINS server, and is set up to be the local master browser on its subnet: netbios name = pw1 workgroup = pw domain master = no local master = yes preferred master = yes os level = 64 wins support = no wins server = 192.168.18.14 name resolve order = wins lmhosts
I can be at machine mtoal and I can browse the CH workgroup in network neighborhood just fine. I can also browse to \\pw1 and \\pw2 in network neighborhood if I type in their names in the address bar, but the PW workgroup does not appear by itself. I can browse to the machine streetsmary from my machine but only if I type in the ip number: \\192.168.20.61
The situation from machine ch2 is the same.
Now, at the PW network, I can control pw2 via VNC. I can readily see both the PW and CH workgroups in network neighborhood. I can browse into shares on any machine in either workgroup.
I call Mary who is using the machine streetsmary at PW and she can not see any evidence of the CH network. When she goes to ch1 via IP by typing \\192.168.18.14, she is prompted for a password which is expected since she is not an admin.
So, the big question:
Why can I see both networks from machine pw2 when I can NOT see them from either ch2 or mtoal (my machine)???
Of course, I would like to be able to get the full browse list on any machine on either network.
Does each network need it's own WINS server since they are in different domains? Then we use remote browse sync and/or remote announce to get them to talk to each other?
I've spent a couple days on this now and I'd really appreciate some advice. Thanks!
mtoal
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba