enhanced browsing is yes, wins pc started first, ping goes fine (as does ssh and other things). also waiting, say, half an hour (or more!) doesn't help
Thanks for your reply. -----Oorspronkelijk bericht----- Van: richard [mailto:[EMAIL PROTECTED] Verzonden: donderdag 20 maart 2003 11:07 Aan: [EMAIL PROTECTED] CC: [EMAIL PROTECTED] Onderwerp: Re: [Samba] not able to browse other domains/workgroups we setup one and ONLY one pc to be a WINS server....and then point EVERY pc on ALL networks to it. we do NOT use "remote announce". I assume "enhanced browsing = yes" ,the hidden default. Ping from one pc to another to test network. Start wins pc first to speed things along...restart every pc so they register with wins...will take a little time to stabilise...it should just work. The only weakness we found is only one wins-server for all domains/networks. regards, Richard Coates. On Wed, 2003-03-19 at 22:41, [EMAIL PROTECTED] wrote: > Hi, > > I have the following situation: > 192.168.64.0/24 is my local network. .1 is my PDC (samba 2.2.6) workgroup > is vanheusden > 192.168.97.0/24 is an intranet somewhere else to which I'm connected > through a vpn. workgroup is enderman > ip-forwarding is enabled on 192.168.64.1 (my default gateway and endpoint > for the vpn) > on 192.168.64.1 I've set hosts allow to 192.168. and 127. > hosts allow = 192.168. 127. > on 192.168.97.1 I've added the following to smb.conf: > remote announce = 192.168.64.255 > remote browse sync = 192.168.64.1 > > when I browse the network on a pc in the 192.168.64.0/24 network, I can > see the workgroups vanheusden and enderman, but for the enderman network > there seem to be no hosts! > > What can this be? > > > Folkert > > -- > To unsubscribe from this list go to the following URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
