Hi there, I've created a CUPS filter to capture de content it's receiving and the Postscript sent by adobe's postscript printer driver arrived B/W.
On the windows printer (with the adobe driver) I don't have any option to activate color. I've something on the Printer Preferences that says: "Color: No". Can't I print colors with this driver? Should I look for a different one? Any help will be appreciated. -- Miguel Manso <[EMAIL PROTECTED]> Quoting Joel Hammer <[EMAIL PROTECTED]>: > I am not really sure of your set up. > > I assume you have installed the drivers on the windows client. > > And, I assume you send the job to a raw queue on the linux box. If not, > maybe your linux filter is removing colors. > > I would look at the driver configuration on the windows client and make > sure you don't have some option checked for B&W only. > > You might print the job to a file, send it over to > the linux box, and open it with gv, and see if you have color. > > Sometimes, depending on your setup, the test page goes to a different > queue than the real print jobs. > > Joel > > > > -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
