| I have a linux box running SuSE 8.2 with samba | 2.2.7-a58. Everything works well except when clients | workstations copy files to their workstations, in | particular my client running Mac OS X. Mac OS X | supports the SMB protocol. I had a look at the logs | but could not see anything that looks out of the | ordinary, not that I know what everything means, but | nothing from a glance that would point to a reason | for my problem. I even rebooted the server but still | no luck. Copying to the server seems fine. In fact | copying a few Gig of data takes less time than | retreiveing 40 MB from the server. | | I also had a look at the network card settings. It's | set to full duplex 100MB and only 0 errors, | collisions are plenty but this is a "flat" network | so it's to be expected.
Hold on. Collisions are not to be expected if your NIC is 100/FD. It implies that there is a switch, not a hub, between your Mac and Samba. You should set your NIC to Auto-Detect speed or to 100/HD if you are connected via a hub. And even if it is a switch, your setting must match the port setting, so check it out. ____________________________________________________________ Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail! http://login.mail.lycos.com/r/referral?aid=27005 -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba