On Fri, 14 Nov 2003, Don Bivens wrote: > Giving this another shot... > > I upgraded Samba 2.x to 3.x and now have issues. > > I have Samba 3 on Linux 2.4.19/Debian. Samba runs as a member server in > an NT4 domain and gets authentication from the DC via > winbind. > > I can copy a few very small files to the Samba share and they work. I > can create and delete text files on that share. When I attempt > to copy files to the share en masse, or even one or two files at a time > (a few work most don't) it ultimately freezes and times out.
Please re-try with the following in your smb.conf [globals]: sendfile = No Let me know if this helps. If not, send me your smb.conf file. Cheers, John T. > > The only interesting thing I've found thus far is: > > > [2003/11/13 17:44:20, 3] smbd/error.c:error_packet(113) > > error packet at smbd/trans2.c(2509) cmd=50 (SMBtrans2) > > NT_STATUS_INVALID_HANDLE > > > One person helpfully asked about my switch/hub and I'm reasonably > confident there's no issue there because everything else on the LAN > seems to work fine. Additionally I've been ssh'ed in the the Linux box > for some time without blowing that connection. > > My Samba log files and a packet capture are located at. > > > http://www.carolinanetworking.com/logs.zip > > Unfortunately I don't have my smb.conf handy but suffice it to say it > was tiny. I saved off the old one and created a basic one with a SWAT > wizard just to be sure I didn't have anything stupid going on there. > > Thanks to anyone with any ideas! > > -- John H Terpstra Email: [EMAIL PROTECTED] -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba