Myself, I would want all computers on the same domain and therefore inAs would I... this multiple domain stuff we have going on now is painful.
the same ldap tree.
We have a fully redundant setup, with dhcp, dns, ldap, and samba boxes in each site, so I'm trying to set things up to use local resources where available. LDAP is a traditional master-slave relationship, so it most cases, everything is perfectly in sync... most of the time.If you suspect that there will be a break in network connectivity higher than say 2% of the time, then you probably have to think in terms of having a 'BDC' and slave LDAP server with wins support = yes in each subnet and set each Windows client (hopefully, you are using DHCP) to use the local BDC/slave LDAP for WINS and secondarily, point to the WINS server on subnet 1. Then you probably need to set remote announce on the machine in subnet 1 to the broadcast address 10.x.x.255 for each subnet.
We do have DHCP all over, but as I'm testing an upgrade right now, it's a little tricky to set WINS automagically... I don't want to hose the working network by changing WINS before the changeover, but I am manually setting WINS while testing.
One thing I've noticed though, is that since I've started testing in 'not the master LDAP server's subnet' I have to join the domain twice. Once to get the machine into LDAP, then wait a couple seconds until I hear the LDAP slave crunch through the slurpd push, and then join again and it works fine. Basically I'm running into a replication delay. I know there's an option to set that higher so that maybe I don't have to do it twice, but I can't remember what it is... is that what the password chat timeout is set for?
Thanks Paul
-- Paul Gienger Office: 701-281-1884 Applied Engineering Inc. Cell: 701-306-6254 Information Systems Consultant Fax: 701-281-1322 URL: www.ae-solutions.com mailto:[EMAIL PROTECTED]
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba