SMB.conf file is attached Thanks to all for helping out
Jose -----Original Message----- From: RRuegner [mailto:[EMAIL PROTECTED] Sent: Tuesday, April 20, 2004 12:11 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Re: [Samba] Samba 3 problem with users not being able to log on from some machines but they can logon from others Jose Martinez schrieb: > Any help would be GREATLY appreciated on this matter, as I am pulling my > hair out. > > I have a Samba PDC running 3.0.2-6.3E. > > My problem I am experiencing is that I can have the same user (lets say > John) be able to log in from workstation A. Sometimes, that user can not log > into another workstation (say workstation B) on the domain. Yet other users > can log into that workstation B with no problem. I am getting an error > "Make sure your user name and password in the domain are correct." etc etc > etc. We know the username/password is ok because that same user can log into > another machine with no problem. > > Clients are Windows 2000 and Windows XP. PDC Operating system is Red Hat > Enterprise ES 3.0. > > Can anyone PLEASE assist here! Thank you in advance. > > Jose > > ******************************* > Jose V. Martinez II > 678-859-5339 > [EMAIL PROTECTED] hi, your smb.conf and some logs will be helpfull Regards
#======================= Global Settings ===================================== [global] # workgroup = NT-Domain-Name or Workgroup-Name workgroup = rtpopsdom netbios name = rtpopssrv # For proper logging off of workstations deadtime = 1 # server string is the equivalent of the NT Description field server string = Operations RTP Samba Node admin users = @admins printer admin = @admins # This option is important for security. It allows you to restrict # connections to machines which are on your local network. The # following example restricts access to two C class networks and # the "loopback" interface. For more examples of the syntax see # the smb.conf man page hosts allow = 9. 10. # if you want to automatically load your printer list rather # than setting them up individually then you'll need this ; printcap name = /etc/printcap ; load printers = yes # It should not be necessary to spell out the print system type unless # yours is non-standard. Currently supported print systems include: # bsd, sysv, plp, lprng, aix, hpux, qnx ; printing = bsd # Uncomment this if you want a guest account, you must add this to /etc/passwd # otherwise the user "nobody" is used ; guest account = pcguest # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 50 log level = 1 # Security mode. Most people will want user level security. See # security_level.txt for details. security = user # Use password server option only with security = server ; password server = <NT-Server-Name> # Password Level allows matching of _n_ characters of the password for # all combinations of upper and lower case. password level = 8 username level = 8 # You may wish to use password encryption. Please read # ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation. # Do not enable this option unless you have read those documents encrypt passwords = true smb passwd file = /etc/samba/smbpasswd # The following are needed to allow password changing from Windows to # update the Linux system password also. # NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above. # NOTE2: You do NOT need these to allow workstations to change only # the encrypted SMB passwords. They allow the Unix password # to be kept in sync with the SMB password. unix password sync = Yes passwd program = /usr/bin/passwd %u passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully* # Unix users can map to different SMB User names ; username map = /etc/samba/smbusers # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /etc/samba/smb.conf.%m # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 # Add user sript for machines add machine script = /usr/sbin/useradd -d /dev/null -g workstations -c "Machine Account" -s /bin/false -M %u # Configure Samba to use multiple interfaces # If you have multiple network interfaces then you must list them # here. See the man page for details. interfaces = 9.44.50.37 # Configure remote browse list synchronisation here # request announcement to, or browse list sync from: # a specific host or from / to a whole subnet (see below) ; remote browse sync = 192.168.3.25 192.168.5.255 # Cause this host to announce itself to local subnets here remote announce = 9.51.72.255 9.51.73.255 9.51.65.255 9.44.130.255 9.44.131.255 9.44.132.255 9.49.145.255 # Browser Control Options: # set local master to no if you don't want Samba to become a master # browser on your network. Otherwise the normal election rules apply local master = yes # OS Level determines the precedence of this server in master browser # elections. The default value should be reasonable os level = 65 # Domain Master specifies Samba to be the Domain Master Browser. This # allows Samba to collate browse lists between subnets. Don't use this # if you already have a Windows NT domain controller doing this job domain master = yes # Preferred Master causes Samba to force a local browser election on startup # and gives it a slightly higher chance of winning the election preferred master = yes # Enable this if you want Samba to be a domain logon server for # Windows95 workstations. domain logons = yes # if you enable domain logons then you may want a per-machine or # per user logon script # run a specific logon batch file per workstation (machine) logon script = startup.bat ; logon script = %m.bat # run a specific logon batch file per username ; logon script = %U.bat # Where to store roving profiles (only for Win95 and WinNT) # %L substitutes for this servers netbios name, %U is username # You must uncomment the [Profiles] share below logon home = \\%L\%U logon drive = n: logon path = \\%L\profiles\%U # All NetBIOS names must be resolved to IP Addresses # 'Name Resolve Order' allows the named resolution mechanism to be specified # the default order is "host lmhosts wins bcast". "host" means use the unix # system gethostbyname() function call that will use either /etc/hosts OR # DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf # and the /etc/resolv.conf file. "host" therefore is system configuration # dependant. This parameter is most often of use to prevent DNS lookups # in order to resolve NetBIOS names to IP Addresses. Use with care! # The example below excludes use of name resolution for machines that are NOT # on the local network segment # - OR - are not deliberately to be known via lmhosts or via WINS. name resolve order = wins bcast lmhosts # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server wins support = yes # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = 9.44.50.37 # WINS Proxy - Tells Samba to answer name resolution queries on # behalf of a non WINS capable client, for this to work there must be # at least one WINS Server on the network. The default is NO. ; wins proxy = yes # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names # via DNS nslookups. The built-in default for versions 1.9.17 is yes, # this has been changed in version 1.9.18 to no. # dns proxy = no # Case Preservation can be handy - system default is _no_ # NOTE: These can be set on a per share basis ; preserve case = no ; short preserve case = no # Default case is normally upper case for all DOS files ; default case = lower # Be very careful with case sensitivity - it can break things! ; case sensitive = no #============================ Share Definitions ============================== [homes] comment = Home Directories browseable = no writable = yes veto oplock files = *.* # Un-comment the following and create the netlogon directory for Domain Logons [netlogon] comment = Network Logon Service path = /home/netlogon guest ok = yes writable = yes write list = @admins root preexec = echo "%u logged in at %T from %m" >> /var/log/samba/login.log # Un-comment the following to provide a specific roving profile share # the default is to use the user's home directory [Profiles] path = /home/profiles browseable = no guest ok = yes writable = yes veto oplock files = /*.* oplocks = no create mask = 707 nt acl support = yes profile acls = yes # This one is useful for people to share files [tmp] comment = Temporary file space path = /tmp read only = no public = yes oplocks = no writable = yes # Administrative share for Workstation hotfixes; software rollouts, etc. [opsfiles] comment = Opsfiles path = /opsfiles/ valid users = @admins public = yes writable = yes write list = @admins oplocks = no # A private directory, usable only by the admins [usr_home] comment = global home dir for users path = /home/ valid users = @admins public = no writable = yes printable = no write list = @admins oplocks = no # A publicly accessible directory, but read only, except for people in # the "staff" group [public] comment = Workstation Files path = /home/public public = yes browsable = yes read list = @admins @users @editors write list = @admins @editors oplocks = no create mask = 0777
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba