Please cc me on replies. My employer recently upgraded to W2K3. I have no control over the employer's set up and limited access to information. Under the old server, everything was working fine. Now I can't mount the shared drive anymore.
I'm running Debian sid; samba 3.0.6-3. ################################################ # mount shared_drive cli_negprot: SMB signing is mandatory and we have disabled it. 13681: protocol negotiation failed SMB connection failed ################################################ I have added to smb.conf: ################################################ client use spnego = yes client signing = mandatory ################################################ This makes no difference. I never had to join the domain/workgroup before, but I thought I would try it as I've seen that suggested in some postings. That doesn't work either (output slightly sanitized for confidentiality): ################################################ # net join -l -n my_computer_name -I shared_server_ip_address -U my_username my_username's password: [2004/09/02 10:44:17, 0] utils/net_ads.c:ads_startup(183) ads_connect: No such file or directory [2004/09/02 10:44:17, 0] rpc_client/cli_netlogon.c:cli_nt_setup_creds(256) cli_nt_setup_creds: request challenge failed [2004/09/02 10:44:17, 0] rpc_client/cli_netlogon.c:cli_nt_setup_creds(256) cli_nt_setup_creds: request challenge failed [2004/09/02 10:44:17, 0] utils/net_rpc_join.c:net_rpc_join_newstyle(319) Error domain join verification (reused connection): NT_STATUS_INVALID_COMPUTER_NAME Unable to join domain <domain_name>. ################################################ I tried adding a workgroup and realm line to /etc/samba/smb.conf: realm = <domain_name> workgroup = <domain_name> Now I get: ################################################ # net join -l -n my_computer_name -I shared_server_ip_address -U my_username my_username's password: [2004/09/02 10:45:59, 0] libads/kerberos.c:ads_kinit_password(136) kerberos_kinit_password [EMAIL PROTECTED] failed: Improper format of Kerberos configuration file [2004/09/02 10:45:59, 0] utils/net_ads.c:ads_startup(183) ads_connect: Improper format of Kerberos configuration file [2004/09/02 10:45:59, 0] rpc_client/cli_netlogon.c:cli_nt_setup_creds(256) cli_nt_setup_creds: request challenge failed [2004/09/02 10:46:00, 0] rpc_client/cli_netlogon.c:cli_nt_setup_creds(256) cli_nt_setup_creds: request challenge failed [2004/09/02 10:46:00, 0] utils/net_rpc_join.c:net_rpc_join_newstyle(319) Error domain join verification (reused connection): NT_STATUS_INVALID_COMPUTER_NAME Unable to join domain <domain_name>. ################################################ If I type the wrong password, it says "The username or password was not correct." So it's clearly getting through one stage of authentication. I am limited in my ability to ask IT staff here any questions, so I basically need to figure this out on my own. Any suggestions? -- Adam Rosi-Kessel http://adam.rosi-kessel.org -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba