My smb.conf file contains in the general section. max print jobs = 50
And i disabled the print queue using this command : disable PrintQueueName Therefore i would expect SAMBA to reject print jobs after the 50th. But in real life it does not, it continues to spool indefinitely. If i run a batch file from a client workstation to print continuously. It means the request to print is made much faster than manually. It will stop when 7 jobs are spooled in the print queue ??!?!?!? Running smbd -i -F -S - - debuglevel=3 returns the following error message on the linux console when 7 jobs are spooled in the print queue: print_job_start: Queue p13113 number of jobs (51) larger than max printjobs per queue (50) error string = no space left on device error packet at smbd/reply.c(3041) cmd=192 (SMBsplopen) NT_STATUS_DISK_FULL but there's only 7 jobs in the queue. Release 3.0.7 does not fix this It seems to be an issue in the way Samba calculate the number of jobs that are in the print queue ? The reason why i am testing this is because one of my customer prints A LOT ( over 2 thousands jobs per day ) and his users gets exactly this problem when lots of people are trying to print at the same time. Default value of max print jobs is 1000 setting this to 0 ( to permit number less of print jobs ) does not fix the issue. HELP ! -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba