I have following smb.conf:
hosts deny = all
hosts allow = 192.168.x.0/32 127.0.0.1/32
name resolve order = wins lmhosts hosts bcast
interfaces = 192.168.x.y/32 127.0.0.1/32
socket address = 192.168.x.y
bind interfaces only = yes
disable netbios = yes
remote browse sync = 192.168.x.255
remote annouance = 192.168.x.255
wins support = yes
Nmbd.log shows strange entries like: __SAMBA__<20> TTL = PERMANENT 192.168.x.y 44.x.y.0 64
If samba is restarted, entries change but they point usually to
44.-networks. This is very annoying since I have nothing to do with those 44.x.y.z
networks.
I wonder where those 44.x.y.0 entries come from?
I have captured network taffic with Ethereal, but there isn't any
traffic going to or coming from 44.-networks.
Even if whole network connection is disconnected (ethernet cable
disconnected) those entries are shown and they change if samba is
restarted.
If I remove 127.0.0.1/32 (my localhost) from interfaces, 44.x.y.0
entries vanish but samba doesn't function correctly after that.
My clients are connected via VPN-tunnels to the server.
192.168.x.y is eth0:1. Maybe I should try to assign own network
card to this. Interface eth0 is my VPN endpoint with public IP
195.x.y.z.Samba 3.07 is running at Fedora Core 1 server.
Samba rpms are downloaded from download.redhat.fedora.com and rpm
versions are:
samba-client-3.0.7-2.FC1
samba-3.0.7-2.FC1
samba-swat-3.0.7-2.FC1
samba-common-3.0.7-2.FC1I have verified samba files with rpm --verify and they are OK.
-- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
