Robert Warner schrieb:
Hi,
Semi-not new to samba, used a previous version a long time ago.
I'm using samba on SuSE 9.0, samba version 'Version 2.2.8a-SuSE'
2 network cards on this machine, eth0&1. I've enabled the samba server
on this machine and it is functional. However, i only want samba to
serve the file system on one of the network cards and not the other. Is
this just a simple configuration item i'm missing? The firewall on this
machine is preventing samba from accessing the other network card, but
every 5 min it attempts to try the other network (which it is firewalled
against attempting). This attempt places many failure messages in my
'messages' log file. I would prefer not to see these messages. Is
there a way to redirect these messages or stop them all together (while
still keeping samba running ;) )?
Example of messages: [Names and IP number changed to protect the
innocent ;)]
Nov 19 19:07:55 WS nmbd[7532]: [2004/11/19 19:07:55, 0]
libsmb/nmblib.c:send_udp(756)
Nov 19 19:07:55 WS nmbd[7532]: Packet send failed to
XXX.XXX.XXX.XX(137) ERRNO=Operation not permitted
Nov 19 19:07:55 WS nmbd[7532]: [2004/11/19 19:07:55, 0]
nmbd/nmbd_packets.c:send_netbios_packet(172)
Nov 19 19:07:55 WS nmbd[7532]: send_netbios_packet: send_packet() to
IP XXX.XXX.XXX.XXX port 137 failed
Nov 19 19:07:55 WS nmbd[7532]: [2004/11/19 19:07:55, 0]
nmbd/nmbd_namequery.c:query_name(265)
Nov 19 19:07:55 WS nmbd[7532]: query_name: Failed to send packet
trying to query name ME<1d>
The ip number is the broadcast ip for the network which i do not want it
to have access to.
Thanks in advance for your reply.
bob
Hi,
i guess setting
bind interfaces only = Yes
and
interfaces = lo eth0
will do the trick, replace eth0 with the name of the correct interface.
lo has to be listed too, the exact reason is mentioned in the manpage.
Christoph
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
