Even when I use the "interfaces" option and even "bind interfaces only", "net lookup dc" still returns IP addresses from the private interfaces, and for that matter another machine that is not even running Samba (once was, no longer). Seems like the info is cached somewhere I don't know of. I'm running Samba 3.0.7.
My PDC's interfaces are as follows (eth0 is down and unused):
eth1: 192.168.10.193/24 eth1:0: 192.168.10.230 eth2: 192.168.20.2/24
Another machine that backs up the PDC - normally not running samba at all, but takes over the .230 address if the PDC goes down has:
eth1: 192.168.10.194/24 eth2: 192.168.20.1/24
When I type net lookup dc, here's what I see: 192.168.10.230 192.168.10.193 192.168.10.194 192.168.20.1 192.168.20.2
Ideally I'd like to have it show just the .230 address. Beats me where all the others are coming from. I've tried:
interfaces = 192.168.10.0/255.255.255.0 127.0.0.1 bind interfaces only = Yes - seems to actually hose things up; clients say a DC is not available
interfaces = 192.168.10.230 127.0.0.1
bind interfaces only = Yes
- works ok but I still see output from net lookup as above and clients trying to talk to the .20 network
interfaces = eth1* 127.0.0.1 bind interfaces only = Yes - same result as #2
Thanks in advance for any help.
Dave
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba
