My test is OK.....Thanks a lot.... There is a mistake in cups exemple web interface.... gb. ----------------------------------- Your URI is incorrect if your printer is a network printer the correct URI must be : lpd://myprinter
----------------------------------- Stéphane PURNELLE stephane.purnelle at corman.be <https://lists.samba.org/mailman/listinfo/samba> Service Informatique Corman S.A. Tel : 00 32 087/342467
samba-bounces+stephane.purnelle=corman.be at lists.samba.org <https://lists.samba.org/mailman/listinfo/samba> a écrit sur 19/01/2005 16:38:44 :
/ hello
/>/ />/ I try to manage a printer (Apple Lawerwriter 16/600 ) with cups but /without
/ succes !!!
/>/ />/ with cups web interface : />/ />/ I "add a printer": />/ device = LPD/LPR Host or Printer />/ URI= lpd://mymachine/lp />/ Type= Apple />/ Model = Apple LaserWriter16/600 Foomatic/Postscript (Recommended)(en) />/ />/ I try to print a testpage but without succes />/ />/ - 'mymachine' is either in my dns and my /etc/hosts file />/ - no problem with " ping myprinter" />/ - no problem with " telnet myprinter 515" />/ - no problem with 'settings of myprinter" />/ />/ LaserWriter 16/600 PS />/ TCP/IP Interface Information />/ />/ Interface Status : Ready />/ PostScript Banner Page : Disabled />/ IP Address : xxx.yyy.zzz.aa />/ Subnet Mask : 255.255.255.0 />/ Default Gateway : xxx.yyy.zzz.bb />/ Timeout Checking : Enabled />/ Ethernet Address : 09:01:08:05:7D:99 />/ />/ - but when I add myprinter and try to print a testpage, (loglevel debug/)
/ I have :
/>/ Remote host did not respond with command status byte after 300 seconds! />/ />/ is there someone to help me? />/ thanks />/ />/ gb./
-- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba